When a light flickers, a fixture goes dead, or a switch stops working, the bulb is rarely the whole story. Number One's licensed Albuquerque electricians find the cause, whether it is the fixture, the switch, a loose connection, or the circuit behind it, and fix it so it stays fixed. We have served homes and businesses across the metro since 2005.
Lighting repair starts with finding where the problem is. A single fixture that flickers or goes dark usually points to a failing socket, a worn fixture, or a loose connection at the fixture or the switch. Lights that dim or flicker in several rooms at once point further back, to a shared circuit, a loose connection in a junction box, or the panel. If you smell something hot or see scorching at a switch or fixture, turn that circuit off and call our emergency electricians instead of waiting for a scheduled visit.
We repair and replace light fixtures, switches, and dimmers, recessed lights, under-cabinet lighting, outdoor and security lights, and ceiling fans with light kits. We also install fixtures and fans you have already bought, and we make sure the box behind them is rated to carry the weight, which matters most with ceiling fans.
Many lighting complaints come from mismatched parts rather than failed ones. An LED bulb on an old dimmer, a fixture rated for a lower wattage than the bulb in it, or a switch that was never meant for the load all cause flicker, buzzing, or early burnouts. Finding the mismatch is often a quicker and cheaper fix than replacing the whole fixture.
Repair it when the fixture is sound and the problem is a socket, a switch, or a connection. Replace it when the fixture is cracked, corroded, or scorched, when its wiring insulation has gone brittle with heat, or when the parts are no longer made. If your lights dim every time a large appliance starts, the fixture is not the problem: the circuit or the panel is near its limit, and an electrical panel upgrade may be the real fix.
Older fixtures are where we see heat damage most. Recessed cans and enclosed ceiling fixtures trap heat, and years of bulbs rated higher than the fixture allows leave the socket and the wires behind it brittle and discolored. When we find that, we tell you, because a fixture in that condition is a fire risk even if it still lights.
Switching to LED solves a lot of that heat problem, but only when the dimmers and fixtures are compatible with the new bulbs. When we replace fixtures or switches, we match them to the bulbs you plan to use so you do not trade a heat problem for a flicker problem.
Age is the biggest factor. Many Albuquerque homes built in the decades after World War II still have original fixtures, switches, and wiring, and connections that have loosened over decades of heating and cooling. Ungrounded circuits and wiring modified by previous owners are common, and they make a simple fixture swap more involved than it looks.
Monsoon season is hard on lighting. Summer lightning and the utility surges that follow storms damage LED drivers, electronic dimmers, and smart switches, and wind-driven rain gets into outdoor fixtures, porch lights, and security lights. A light that stopped working right after a storm should be checked before you buy a replacement.
The sun takes its toll too. Outdoor fixtures in the high desert sun crack, fade, and lose their seals faster than in milder climates, and dust gets in once the seals fail. Attic heat in summer also shortens the life of recessed lights and the connections above them.
We work on indoor and outdoor fixtures of every age and brand, including recessed lights, ceiling fans, dimmers and smart switches, under-cabinet lighting, and security and landscape lights.
Many of them, yes. Flickering, buzzing, and bulbs that burn out early are early warnings, and catching them before a connection overheats costs far less than repairing the damage after. The Uno Care Club Electrical plan includes an electrical system inspection, breaker panel cleaning, GFCI outlet testing, and a thermal imaging scan that finds hot connections before they fail. Members also get priority scheduling and one year of repair protection on covered repairs.
Members earn up to $600 annually and can bank up to $3,000 in credits.
Real people, real results
"Ricardo did a great job troubleshooting some strobe lights that were flickering. Fixed the problem in less than an hour. He’s a lovely capable guy."
"Ricardo was very efficient and thorough with replacing and installing light fixtures. They look great. Ricardo is pleasant and professional. Thank you."
"Excellent work. Had some fans and lights installed. Very professional. Very clean and efficient. Ricardo did an excellent job and didn't hesitate to answer any questions I had."
Schedule online or give us a call and tell us what the light is doing. Many lighting repairs are finished on the first visit. Businesses with lighting problems can ask about our commercial electrical services. Weekend calls are billed at weekday rates; after-hours calls carry an additional charge. Every repair is backed by our Satisfaction Pledge.
One flickering light is usually a loose bulb, a failing socket, or a loose connection at the fixture or switch. Lights that flicker in several rooms at once, or dim when an appliance starts, point to a shared circuit, a loose connection in a junction box, or the panel, and should be checked soon.
Usually the bulb is rated for more heat than the fixture can handle, the socket is worn, or a connection is loose and causing the voltage to jump. Replacing the bulb again will not fix it. The socket, the fixture, or the connection needs attention.
Most older dimmers were made for incandescent bulbs and do not work well with LEDs. Replacing the dimmer with one rated for LED bulbs, and using dimmable bulbs, usually fixes the flicker and the buzz.
Yes. We install fixtures and ceiling fans you have purchased. We also check that the box in the ceiling is rated to hold the weight, and replace it if it is not, which matters most with ceiling fans.
It can be. A switch that feels warm, buzzes, or is discolored, or a fixture that smells hot, can mean a loose connection or an overloaded circuit. Turn it off and have it checked. If you see smoke or scorching, turn off the breaker and call right away.
Weekend calls are billed at weekday rates; after-hours calls carry an additional charge. Most lighting repairs are scheduled during regular hours, and we answer the phone around the clock if a lighting problem turns into an emergency.
At Number One Plumbing, AC, Solar & Electric, everything we do is backed by our unwavering commitment to your satisfaction. As a customer-focused company, we prioritize your experience above all. Your satisfaction is crucial to us, and we strive to ensure that you're completely pleased with our work, our professionalism, and our overall service.
If, for any reason, you find yourself less than satisfied, please do not hesitate to reach out to us. We are eager to listen and understand your concerns and are committed to resolving them. As a deeply rooted local business, our goal is to uphold the trust and respect of every customer and every home we serve.
Let us know how we can make things right. Your contentment is our promise, and we will do whatever it takes to achieve it.
Number One Plumbing, AC, Solar & Electric makes it easy to afford the services you need for your home. Contact us today to learn more about our financing program.
