Es posible que no los notes al principio. Un leve goteo debajo del fregadero. Un leve silbido detrás de una pared. Un aumento repentino en su factura de agua que no coincide con su consumo. Estos son los «sifones silenciosos», es decir, las fugas ocultas en las tuberías que desperdician agua silenciosamente, aumentan los costos y preparan el terreno para daños costosos.
After years of working on systems across Albuquerque, we can tell you this: every noise you ignore in October is an emergency call you'll deal within January. That might sound blunt, but it's the reality we see every single winter.
Let's break down what those noises actually mean, why they show up right before winter, and how to avoid turning a small issue into a major problem.
1. The "Bang" or "Boom" — Delayed Ignition
A loud pop or boom right when the furnace kicks on is almost always delayed ignition. Dust and carbon buildup prevent the burners from lighting immediately, so gas builds up for a few seconds — then ignites all at once. That boom isn't just alarming; it's a small explosion. Over time, repeated ignitions like this can damage critical components, including the heat exchanger.
We've seen homeowners ignore this sound for weeks, only to end up with major system damage that a simple cleaning could have prevented.
2. The "Squeal" or "Screech" — Blower Motor Issues
A high-pitched metallic squeal at startup typically points to failing motor bearings or a dry blower motor. In older systems, it may be a worn belt. Albuquerque's fine desert dust can make this worse than most people realize — it gets into the motor and acts like sandpaper, accelerating wear over time. Left alone, the motor works harder, overheats, and eventually fails, usually at the worst possible moment.
3. The "Rattle" or Vibration — Loose Parts or Something Worse
A rattling sound — think "card in bicycle spokes" — has a wide range of causes. Best case, it's a loose panel or screw. Worst case, it's a cracked heat exchanger. As metal expands and contracts with temperature changes, cracks can produce a distinct rattle, and that's something we take very seriously given the carbon monoxide risk involved.
4. The "Rapid Clicking" — Ignition Failure
Fast, repetitive clicking that never results in the system lighting isusually a dirty flame sensor or failing igniter. In Albuquerque, dust builup is often the culprit — it prevents the sensor from detecting the flame properly, so the system keeps attempting to ignite before shutting down as a safety measure.
5. The "Whistling" — Airflow Problems
A high-pitched whistle coming from the vents or the furnace itself usually means the system is starving for air. The most common cause is a clogged air filter or a blocked return vent. This is one of the few furnace issues where a simple filter replacement may solve the problem entirely.
If your furnace starts making noise, turn it off if you notice anythingunusual — especially a smell. Check and replace your air filter, clear the areaaround the unit, and pay attention to exactly when the noise occurs, since that detail helps narrow down the cause quickly.
What you shouldn't do: ignore a boom or bang, attempt complex repairs yourself, or simply try to live with the noise. No furnace noise is normal. If your system is making sound it wasn't before, something is wearing out, misfiring, or struggling to operate properly. Catching it early gives you options. Waiting limits them.
Los sistemas de plomería más antiguos conllevan sus propios riesgos. Las tuberías galvanizadas, comunes en las casas construidas hace décadas, se corroen de adentro hacia afuera. Las juntas de soldadura pueden aflojarse con el paso del tiempo. Además, en muchos hogares locales, la presión del agua es de 80 a 110 psi, muy por encima de los 60 psi ideales, lo que acelera el desgaste. Mitch recomienda instalar una válvula reductora de presión (PRV) si su hogar aún no tiene una. «Es como proteger las tuberías con un cinturón de seguridad», explica.
Addressing the problem now means you stay in control. Waiting means the weather takes over.
If your furnace is making unusual noises, now is the time to have it checked. Call us today to schedule service.
Not really. A brief sound at startup can happen, but loud or unfamiliar noises aren't normal and should be evaluated.
Booming, banging, or persistent rattling can signal serious problems like delayed ignition or a cracked heat exchanger, both of which carry real safety risks.
Startup noises typically point to ignition issues —delayed ignition or burner problems are the most common causes.
Yes. A clogged filter restricts airflow and can produce whistling, cause overheating, and put unnecessary strain on the system.
If the noise is loud, unfamiliar, or paired with an unusual smell, turnit off and have it inspected before running it again.
This is usually a dirty flame sensor or failing igniter preventing the sstem from confirming a flame is present.
Common signs include rattling noises, unusual smells, or inconsistent heating throughout the house. A professional inspection is required to confirm it.
Early fall is ideal — before the system is under heavy use — so any issues can be caught and addressed before you actually need the heat.
